Test drove vehicle and monitored cylinder head temp with scan tool, vehicle warms up normally and heat operates. Turned temperature knob to full cold, let blend door cycle and attempted to turn it back to full heat and it was stuck on cold. Verified temperature blend door was getting proper signals but is not moving. Recommend replacing temperature blend door actuator. Check engine light is on with code p0442-small evap leak detected.
Checked for parasitic draw and found none. Found battery terminals needed cleaning. Cleaned battery terminals. Tested battery and charging system all tested good.
CHARGING SYSTEM – Check – [Includes: Check Battery, Regulator and voltage output.]
BATTERY TERMINAL CLEAN AND TIGHTEN
CREDIT CARD FEE
BRENDA O. gave our service a 5 star review on 8/29/2023
Pump not operating. Fluid slightly low, topped off fluid and pump is still inop. Replaced power steering pump and bled system and verified correct operation. Topped off front tire pressures that were low.
POWER STEERING PUMP – Remove & Replace
SUSAN M. gave our service a 5 star review on 3/28/2023